Using high-resolution topography models not available in the past, geologists can greatly enrich their research. However, current methods of acquisition are costly and require trained personnel with high-tech, cumbersome equipment. In light of this, Kendra Johnson and colleagues have developed a new system that takes advantage of affordable, user-friendly equipment and software to produce topography data over small, sparsely vegetated sites at comparable (or better) resolution and accuracy to standard methods.
Their workflow is based on structure from motion (SfM), which uses overlapping photographs of a scene to produce a 3-D model that represents the shape and scale of the terrain. To acquire the photos, Johnson and colleagues attached a camera programmed to take time-lapse photos to a helium balloon or small, remote-controlled glider. They augmented the aerial data by recording a few GPS points of ground features that would be easily recognized in the photographs.
Using a software program called Agisoft Photoscan, they combined the photographs and GPS data to produce a robust topographic model.
Johnson and colleagues note that this SfM workflow can be used for many geologic applications. In this study for Geosphere, Johnson and colleagues focused on its potential in studying active faults that pose an earthquake hazard.
They targeted two sites in southern California, each of which has existing topography data collected using well-established, laser-scanning methods.
The first site covers a short segment of the southern San Andreas fault that historically has not had a large earthquake; however, the ground surface reveals evidence of prehistoric ruptures that help estimate the size and frequency of earthquakes on this part of the fault. The team notes that this evidence is more easily quantified using high-resolution topography data than by geologists working in the field.
The second site covers part of the surface rupture formed during the 1992 Landers earthquake (near Palm Springs, California, USA). Johnson and colleagues chose this site to test the capability of their workflow as part of the scientific response that immediately follows an earthquake.
At each site, they compared their SfM data to the existing laser scanner data and found that the values closely matched. Johnson and colleagues conclude that their new SfM workflow produces topography data at sufficient quality for use in earthquake research.
Rapid mapping of ultra-fine fault zone topography with structure from motion Kendra Johnson et al., Dept. of Geophysics, Colorado School of Mines, 1500 Illinois Street, Golden, Colorado 80401, USA. Posted online 29 Aug. 2014; http://dx.doi.org/10.1130/GES01017.1
Note : The above story is based on materials provided by Geological Society of America